A Well-Connected Home Is a Smart Home

In the digital era, we’ve observed technology grow ever “smarter,” as our devices, tools and appliances advance steadily toward greater connectivity, autonomy and responsiveness. Even homes are getting smarter as lighting, temperature and security systems operate with increasing integration and diminishing oversight on our behalf.

And while these advances may offer more convenience or peace of mind, it’s crucial that residential homes ultimately be structurally — not just technologically — smart. A structurally sound, smartly built home has a frame that’s connected throughout all of its walls and floors, from the roof down to the foundation. It’s constructed by creating what’s known as a “continuous load path,” wherein a system of wood, metal connectors, fasteners and shearwalls tie the entire frame together at critical points.

Building or retrofitting a home with a continuous load path greatly increases its structural safety, and is especially important if you build in an area that is seismically active or prone to high-wind events like hurricanes or tornadoes. A continuous load path helps hold the house together when ground forces or strong winds try to pull it apart. Forces and pressures such as uplift, sliding, racking and overturn, are transferred from the frame to the foundation, which is the strongest part of the house. A home is more likely to withstand these events and stay intact when all parts of the house — roof, walls, floors and foundation — are connected together.

Although building codes require homes to be built with a continuous load path, not all parts of the country follow these national building standards. And older homes, built before 1985, typically do not have a continuous load path. Framing used to be done by “toe-nailing.” However, during high winds and earthquakes, nails tend to pull or pop out, causing significant damage to homes.

Connections made with metal connectors are much more difficult to be pulled apart, due to their high load capacity. It takes greater force to separate a connector than a toe-nailed connection, which is why today many builders choose to use connectors to construct their homes.

Even if you don’t live in a seismically active or coastal region, all states are subject to high-wind storms, and many to thunderstorms and blizzards. Making sure homes are built with connectors and a continuous load path provides the extra reinforcement that enhances the safety of homes and protects families when an unexpected weather event happens.

Adding connectors is a relatively inexpensive investment. Depending on the size of the home, it can cost anywhere between a few hundred to a few thousand dollars. Adding connectors and bracing to secure a foundation, for example, is a relatively low-cost retrofit project. Remember that the cost of a retrofit is nominal compared to that of repairing or rebuilding a home.

Even in the age of the ubiquitous smart device, often the best and smartest designs aren’t digital — but rely instead on good, old-fashioned strength and resilience.

To promote builders who build quality, well-connected homes, Simpson Strong-Tie features these builders in its Builder Locator on the website.

Well-Connected Home™ Builders

Find a Quality Home Builder in Your Area

To make sure you have a well-connected home, find a quality builder in your area by visiting Safe, Strong Home.

Well-connected home